24 Volt Doorbell Transformer, C Wire Adapter Thermostats, Compatible with Ecobee, Nest and Honeywell Smart WiFi Thermostat, For Ring Nest,Wyze Doorbell (with 196in Cable White)

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

£8.69

Category:

24 Volt Doorbell Transformer, C Wire Adapter Thermostats, Compatible with Ecobee, Nest and Honeywell Smart WiFi Thermostat, For Ring Nest,Wyze Doorbell (with 196in Cable White)61CLhOa1PnL. SL150061ZRrUuYMtL. SL150071FbBwkfvnL. SL150071Z+pdllfJL. SL1500712cy+2CwOL. SL150071kJZKSZYzL. SL1500

Product Description

8888888888

remarks;CE Certificate No.: 21AS040305L368A001, Issued on December 9, 2021 by Dongguan Anci Electronic Technology Co., Ltd

gffff

gffff
5m/196” wire cable

Our adapter is 5M (196inch) cord, long enough to reach your outlets,And with Wire Clip, convenient wire routing.

Packing List:

1×24 Volt power adapter

1 bag*Gift Wire Clip (20pcs)

sdgsgfghf

sdgsgfghf
Hardwired power supply

By setting the doorbell as a hard-wired power supply, the doorbell is always in a charging state and will never be powered off, which can save the trouble of frequently disassembling and charging the battery.

Production Process

Production Process
Power adapter production process and inspection process

High standards of production environment and testing equipment.

70292e6b 6ff6 4cf3 a057 aaffdbe48d47. CR0,0,300,400 PT0 SX300 V170292e6b 6ff6 4cf3 a057 aaffdbe48d47. CR0,0,300,400 PT0 SX300 V1

26862686 For Thermostats

1. Cut off the power of circuit breaker.

2. Install the wire from your 24 volt adapter to the “C” terminal and the other wire to the “RC” terminal. You need to use included jumper and connect from “RH” to “RC” terminals,if HVAC system has a cooling.

3. Plug the power adapter into the socket and turn on the power of the circuit breaker.

4. Install the panel on the thermostat.

For doorbell Installation guide

1.Loosen the screw behind the doorbell.2.Link 2 wire tips to the two terminal on the back of the doorbell.3.Switch on the 230-240V AC power, until the rim of the button flash white light.4.Starts to work when the Power voltage is good.
• Input voltage: 230-240 V/AC, 50 Hz • Output voltage: 24 V, 0.5 A/ AC No-load voltage::28.2V ±5% measured by a multimeter • Cable length: 315inch

gfhdhfgfhdhf

Doorbell Transformer Hardwired Feature Connection

fdgfhgfdgfhg

24VAC Wire power adapter: plugs into your standard 230V/240V outlet and converts to 24 volt AC current
24 volt transformer for doorbells: powers up smart for (Nest, for Ecobee, for Honeywell, for Emerson Sensi, etc.) and doorbells (for Ring, for Nest Hello, for Wyze) that require 24 volt power for operation.Note: The brand above is only for demonstrating compatibilityyy
CE certified: CE certification passed, stable and durable operation 24V transformer
Easy installation: 2 pin non-polarity wires support easy and quick install, 196Inch cable is long enough to plug it into an electrical outlet inside or outside your house
Packing list: 1 x 24 Volt C wire adapter, 1 bag (20 pieces) of cable clips. Note: Please add a 50W Watt 25 Ohm Resistor if you use this transformer to power a doorbell. The brand mentioned above is just for demonstrating compatibility
Note: The brand above is only for demonstrating compatibilityyy

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “24 Volt Doorbell Transformer, C Wire Adapter Thermostats, Compatible with Ecobee, Nest and Honeywell Smart WiFi Thermostat, For Ring Nest,Wyze Doorbell (with 196in Cable White)”

Your email address will not be published. Required fields are marked *

Shop E Store
Logo
Compare items
  • Total (0)
Compare
0
Shopping cart